Publications

Dr. Golovin's Google Scholar Page

The DREAM Lab on ResearchGate

Feel free to email Prof. Golovin for any of the articles below. For academic use only!

BEAMS (Ice-phobic metals)

Transparent Superomniphobic Surfaces

SWOLL Coatings

LIT Materials

Journal Articles

Year Article Authors Journal
2023

Molecularly Capped Omniphobic Polydimethylsiloxane Brushes with Ultra-Fast Contact Line Dynamics

B. Khatir, Z. Azimi Dijvejin, P. Serles, T. Filleter, K. Golover

 Small

An improved plastination method for strengthening bamboo culms, without compromising biodegradability

R. Osmond, O. Margoto, I. A. Basar, T. Olfatbakhsh, C. Eskicioglu, K. Golovin, A. Milani

 Scientific Reports

Comment on “Vapor Lubrication for Reducing Water and Ice Adhesion on Poly(dimethylsiloxane) Brushes”: Vapor Alteration Alone Reduces Water Droplet Adhesion

B. Khatir, K. Golovin

 Advanced Materials

Polydimethylsiloxane-coated textiles with minimized microplastic pollution

S. Lahiri, Z. Azimi Dijvejin, K. Golovin

 Nature Sustainability
2022

Smart low interfacial toughness coatings for on-demand de-icing without melting

Z. Azimi Dijvejin, M. C. Jain, R. Kozak, M. H. Zarifi, K Golovin

 Nature Communications

Complete Inhibition of Vertical Mosquito Landing through Topographical Surface Design

L. Recla, M. Rheault, K. Golovin

 ACS Applied Materials & Interfaces

Modeling and Prediction of Thermophysiological Comfort Properties of a Single Layer Fabric System Using Single Sector Sweating Torso

 

F. Gholamreza, Y. Su, R. Li, A. V. Nadaraja, R. Gathercole, R. Li, P. I. Dolez, K. Golovin, R. M. Rossi, S. Annaheim, A. S. Milani

 Materials

Durable Metallic Surfaces Capable of Passive and Active De-icing

K. A. Zarasvand, C. Pope. S. Nazari, D. Orchard, C. Clark, J. Brinkerhoff, K. Golovin

 Advanced Engineering Materials

Effect of Curvature on Durable Ice-phobic Surfaces based on Buckling Metallic Plates

K. A. Zarasvand, D. Orchard, C. Clark, K. Golovin

 Materials & Design

Surface design strategies for mitigating ice and snow accretion

A. Dhyani, W. Choi, K. Golovin, A. Tuteja

 Matter

Thermal Insulation and Superhydrophobicity Synergies for Passive Snow Repellency

X. Zhao, K. A. Zarasvand, C. Pope, K. Golovin

 ACS Applied Materials & Interfaces

A kinetic model for predicting imperfections in the bioink photopolymerization process during visible-light stereolithography printing

H. Kumar, P. Ambhorkar, I. Foulds, K. Golovin, K. Kim

 Additive Manufacturing

Enhanced protection face masks do not adversely impact thermophysiological comfort

F. Gholamreza, A. V. Nadaraja, A. S. Milani, K. Golovin

 PLOS ONE

Crosslinking Inert Liquidlike Polydimethylsiloxane Brushes using Bis-Diazirine Chemical Insertion for Enhanced Mechanical Durability

X. Zhao, L. Bi, B. Khatir, P. Serles, T. Filleter, J. E. Wulff, K. Golovin

 Chemical Engineering Journal

Polydimethylsiloxane brushes and the search for extraterrestrial life

K. Golovin, B. Khatir, L. Recla, Z. Azimi Dijvejin, X. Zhao

 Surface Topography: Metrology and Properties

*Invited submission to the 2022 Emerging Leaders Special Issue

High-resolution extrusion printing of Ti3C2-based inks for wearable human motion monitoring and electromagnetic interference shielding

A. Ghaffarkhah, M. Kamkar, Z. Azimi Dijvejin, H. Riazi, S. Ghaderi, K. Golovin, M. Soroush, M. Arjmand

 Carbon

Suspended kirigami surfaces for multi-foulant adhesion reduction

Z. Azimi Dijvejin, B. Khatir, K. Golovin

 ACS Applied Materials & Interfaces

Magnetically coupled planar microwave resonators for real-time saltwater ice detection

K. Luckasavitch, R. Kozak, K. Golovin, M. H. Zarifi

 Sensors and Actuators A: Physical
2021
A high-performance hybrid green composite using plastinated bamboo fillers, with reduced environmental degradation effect

 

D. K. Dhir, R. Osmond, K. Golovin. A. S. Milani

 Composite Structures

Metallic Plate Buckling As a Low Adhesion Mechanism for Durable and Scalable Icephobic Surface Design

K. Alasvand Zarasvand, C. Pope, M. Mohseni, D. Orchard, C. Clark, K. Golovin

 Advanced Materials Interfaces

Ultrasmall Volume Single-Droplet Viscometry: Monitoring Cornering Instabilities on Omniphobic Polydimethylsiloxane Brushes

B. Khatir and K. Golovin

 Langmuir 

Rapid and Robust Surface Treatment for Simultaneous Solid and Liquid Repellency

 

A. K. Halvey, B. Macdonald, K. Golovin, M. Boban, A. Dhyani, D. H. Lee, J. W. Gose, S. L. Ceccio, A. Tuteja

 ACS Applied Materials & Interfaces

Scalable Manufacturing of Flexible and Highly Conductive Ti3C2Tx/PEDOT:PSS Thin Films for Electromagnetic Interference Shielding

A. Ghaffarkhah, M. Kamkar, H. Riazi, E. Hosseini, Z. A. Dijvejin, K. Golovin, M. Soroush, M. Arjmand

 New Journal of Chemistry

Influence of Topical Cross-Linking on Mechanical and Ballistic Performance of a Woven Ultra-High-Molecular-Weight Polyethylene Fabric Used in Soft Body Armor

M. L. Lepage, M. Takaffoli, C. Simhadri, R. Mandau, M. P. Gashti, R. Nazir, M. Mohseni, W. Li, C. Liu, L. Bi, G. Falck, P. Berrang, K. Golovin, A. S. Milani, G. A. DiLabio, J. E. Wulff

 ACS Applied Polymer Materials

Lossless, passive transportation of low surface tension liquids induced by patterned omniphobic liquidlike polymer brushes

M. Soltani and K. Golovin

 Advanced Functional Materials

Comparative study on the influence of surface characteristics on de-icing evaluation

H. Memon, K. Mirshahidi, K. A. Zarasvand, K. Golovin, D. S. A. De Focatiis, K.-S. Choi, X. Hou

 Journal of Materials Science

Macroscopic Evidence of the Liquidlike Nature of Nanoscale Polydimethylsiloxane Brushes

 X. Zhao, B. Khatir, K. Mirshahidi, K. Yu. J. N. Kizhakkedathu, K. Golovin ACS Nano 

Quasicrystalline Coatings Exhibit Durable Low Interfacial Toughness with Ice

 M. Mohseni, L. Recla, J. Mora, P. G. Gallego, A. Agüero, K. Golovin ACS Applied Materials & Interfaces

Smart superhydrophobic textiles utilizing long-range antenna sensor for hazardous aqueous droplet detection plus prevention

 K. K. Kazemi, T. Zarifi, M. Mohseni, R. Narang, K. Golovin, M. H. Zarifi ACS Applied Materials & Interfaces

Patch Antenna Sensor for Wireless Ice and Frost Detection

 R. Kozak, K. K. Kazemi, T. Zarifi, K. Golovin, M. H. Zarifi Scientific Reports

The roles of electrolyte chemistry in hard carbon anode for potassium-ion batteries

 Z. Wu, J. Zou, S. Shabanian, K. Golovin, J. Liu Chemical Engineering Journal
A Group Multicriteria Decision Making with ANOVA to Select Optimum Parameters of Drilling Flax Fibre Composites: A Case Study R. Osmond, Z. Mollahoseini, J. Singh, A. Gautam, R. Seethaler, K. Golovin, A. S. Milani Composites Part C: Open Access
Non-fluorinated sprayable fabric finish for durable and comfortable superhydrophobic textiles M. Mohseni, H. S. Far, M. Hasanzadeh, K. Golovin Progress in Organic Coatings
Designing scalable elastomeric anti-fouling coatings: shear strain dissipation via interfacial cavitation M. Mohseni, Z. A. Dijvejin, K. Golovin Journal of Colloid and Interface Science
Cohesive zone analysis of cylindrical ice adhesion: Determining whether interfacial toughness or strength controls fracture *K. A. Zarasvand, *M. Mohseni, K. Golovin
*Equal author contribution		 Cold Regions Science and Technology
Oleophobic textiles with embedded liquid and vapor hazard detection using differential planar microwave resonators B. D. Wiltshire, K. Mirshahidi, A. V. Nadaraja, S. Shabanian, R. Hajiraissi, M. H. Zarifi, K. Golovin Journal of Hazardous Materials
2020
Turbulent Skin Friction Reduction through the Application of Superhydrophobic Coatings to a Towed Submerged SUBOFF Body J. W. Gose,K. Golovin, M. Boban, B. Tobelmann,E. Callison, J. Barros, M. P. Schultz, A. Tuteja, M. Perlin, S. L. Ceccio Journal of Ship Research
Modified Microwave Sensor with a Patterned Ground Heater for Detection and Prevention of Ice Accumulation R. Kozak, B. D. Wiltshire, M. A. R. Khandoker, K. Golovin, M. H. Zarifi ACS Applied Materials & Interfaces
Statistical Heuristic Wettability Analysis of Randomly Textured Surfaces M. A. R. Khandoker, K. Golovin Langmuir
Anisotropy-induced directional self-transportation of low surface tension liquids: a review M. Soltani, K. Golovin RSC Advances
A high throughput tensile ice adhesion measurement system *K. Mirshahidi, *K. A. Zarasvand, W. Luo, K. Golovin
*Equal first-author contribution		 HardwareX
Kirigami enabled microwave resonator arrays for wireless, flexible, passive strain sensing Z. A. Dijvejin, K. K. Kazemi, K. A. Zarasvand, M. H. Zarifi, K. Golovin ACS Applied Materials & Interfaces
Rational design of perfluorocarbon-free oleophobic textiles S. Shabanian, B. Khatir, A. Nisar, K. Golovin Nature Sustainability
Design and High-Resolution Characterization of Silicon Wafer-like Omniphobic Liquid Layers Applicable to Any Substrate B. Khatir, S. Shabanian, K. Golovin ACS Applied Materials & Interfaces
Gold Coplanar Waveguide Resonator Integrated with a Microfluidic Channel for Aqueous Dielectric Detection S. Mohammadi, B. Wiltshire, M. C. Jain, A. V. Nadaraja, A. Clements, K. Golovin, D. J. Roberts, T. Johnson, I. Foulds, M. H. Zarifi IEEE Sensors Journal
Non-fluorinated Omniphobic Paper with Ultra-low Contact Angle Hysteresis X. Zhao, M. A. R. Khandoker, K. Golovin ACS Applied Materials & Interfaces
Polyether ether ketone surface modification with plasma and gelatin for enhancing cell attachment M. M. Omrani, H. Kumar, M. G. A. Mohamed, K. Golovin, A. S. Milani, A. Hadjizadeh, K. Kim Journal of Biomedical Materials Research
2019
Robust and Sensitive Frost and Ice Detection via Planar Microwave Resonator Sensor B. Wiltshire, K. Mirshahidi, K. Golovin, M. H. Zarifi Sensors & Actuators B. Chemical
Low–interfacial toughness materials for effective large-scale deicing K. Golovin, A. Dhyani, M. Thouless, A. Tuteja Science
Influence of textural statistics on drag reduction by scalable, randomly rough superhydrophobic surfaces in turbulent flow A. Rajappan, K. Golovin, B. Tobelmann, V. Pillutla, Abhijeet, W. Choi, A. Tuteja, G. H. McKinley Physics of Fluids
2018
Characterization of Superhydrophobic Surfaces for Drag Reduction in Turbulent Flow J. Gose, K. Golovin, M. Boban, J. M. Mabry, A. Tuteja, M. Perlin, S. L. Ceccio Journal of Fluid Mechanics
Smooth, All-Solid, Low-Hysteresis, Omniphobic Surfaces with Enhanced Mechanical Durability M. Boban, K. Golovin, B. Tobelmann, O. Gupte, J. M. Mabry, A. Tuteja ACS Applied Materials & Interfaces
2017
A predictive framework for the design and fabrication of icephobic polymers K. Golovin and A. Tuteja Science Advances
Designing Self-Healing Superhydrophobic Surfaces with Exceptional Mechanical Durability K. Golovin, M. Boban, J. M. Mabry and A. Tuteja ACS Applied Materials & Interfaces
2016
Effects of extreme transverse deformation on the strength of UHMWPE single filaments for ballistic applications K. Golovin and S. L Phoenix Journal of Materials Science
High resolution velocity measurement in the inner part of turbulent boundary layers over super-hydrophobic surfaces H. Ling, S. Srinivasan, K. Golovin, A. Tuteja, G. McKinley and J. Katz Journal of Fluid Mechanics
Bio-Inspired Surfaces for Turbulent Drag Reduction K. Golovin, J. W. Gose, M. Perlin, S. L. Ceccio and A. Tuteja Philosophical Transactions of the Royal Society A
Designing Durable Icephobic Surfaces K. Golovin, S. P. R. Kobaku, E. T. DiLoreto, J. M. Mabry, and A. Tuteja Science Advances
2015 and Prior
Transparent, Flexible, Superomniphobic Surfaces with Ultra-Low Contact Angle Hysteresis K. Golovin, D. H. Lee, J. M. Mabry and A. Tuteja Angewandte Chemie
Comparison of Elastic Moduli of Porous Cordierite by Flexure and Dynamic Test Methods R. J. Stafford, K. Golovin, A. Dickinson, T. R. Watkins, A. Shyam and E. Lara-Curzio Ceramic Engineering and Science Proceedings

Conference Papers

Title Authors Conference
Understanding interfacial cavitation in the design of low ice adhesion surfaces K. Golovin, M. Mohseni, K. A. Zarasvand 16th Coatings Science International (CoSi), Virtual, (2021)
On the Development of Self-Sensing Textile Preforms using Fused Deposition Modelling: A Preliminary Investigation of Process Parameters C. Keegan, B. Khatir, M. A R. Khandoker, K. Golovin, A. S. Milani 11th Canadian-International Conference on Composites (CANCOM2019), Kelowna, BC (2019)
In-line optical characterization enabled through a new, robust coating that prevents fouling by bitumen N. N. Nata, B. Khatir, and K. Golovin Suncor Academic Forum on Transformational Technology for Energy Systems, Calgary, AB (2018)
Laser Doppler Velocimetry Measurements of A Turbulent Boundary Layer Flow over Sprayed Superhydrophobic Surfaces J. W. Gose, K. Golovin, J. M. Bario, M. P. Schultz, A. Tuteja, M. Perlin, and S. L. Ceccio 10th International Symposium on Turbulence and Shear Flow Phenomena (TSFP10), Chicago, USA (2017)
Experimental Investigation of Turbulent Skin-Friction Drag Reduction Along Superhydrophobic Materials J. W. Gose, K. Golovin, A. Tuteja, S. L. Ceccio and M. Perlin 31st Symposium on Naval Hydrodynamics, Monterey, USA (2016)
Flow Structure and Turbulence in the Inner Part of Turbulent Boundary Layers over Super-Hydrophobic Surfaces H. Ling, S. Srinivasan, K. Golovin, V. Pillutla, A. Singh, G. McKinley, A. Tuteja, W. Choi and J. Katz 31st Symposium on Naval Hydrodynamics, Monterey, USA (2016)
Use of Vision-Based Methods for Measurement of Mechanical Properties of Exhaust Catalysts A. P. Dickinson, P. J. Gloeckner, R. J. Stafford and K. Golovin Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, 165–171, Philadelphia, USA (2012)